TYRE RETREADING & REPAIR MACHINERIES - Elgi Rubber - Page 3

Features :

Manual controlled and operated probe.
Manually operated nail hole detection system
It can be installed on 2 & 6 Series+K57+F55:K56+H55:K56+G55:K56+K57+F55:K56+F55:K56+E55:K56+F55:K5+G55:K56

CATALOGUE
REQUEST A QUOTE

SKIVING STAND

Available Features	SK 2E
Power Requirement	~1.5KW
Machine Weight	~100 Kg
Tyre Rotation FWD / REV Control	Available
Mono rail Compatibility	Compatible
Tools Tray / Box	Available / Tools Box NA
Flexible Shaft Grinder Compatibility	Available – Optional
Supply Voltage	110-240V 50/60Hz (Based on Customer requirement)
Control Voltage	220V DC
Air Pressure Requirement	NA
Minimum Tyre Size	6.50 – 14
Maximum Tyre Size	12.00 – 24.5
Machine Dimension – LxWxH	~900 x 750 x 2850
Installation	Grouting Recomended

Features :

Integrated with tread cutting and Cushion Gum application machine
Easy tread length measurement with built-in scale.
Tread edge buffing capability
Reduce contamination with a stainless steel work top for easy cleaning and maintenance
Slotted holes in frame for venting fumes after BVC Application

CATALOGUE
REQUEST A QUOTE

SKIVING STAND

Available Features	SK 2E
Power Requirement	~1.5KW
Machine Weight	~100 Kg
Tyre Rotation FWD / REV Control	Available
Mono rail Compatibility	Compatible
Tools Tray / Box	Available / Tools Box NA
Flexible Shaft Grinder Compatibility	Available – Optional
Supply Voltage	110-240V 50/60Hz (Based on Customer requirement)
Control Voltage	220V DC
Air Pressure Requirement	NA
Minimum Tyre Size	6.50 – 14
Maximum Tyre Size	12.00 – 24.5
Machine Dimension – LxWxH	~900 x 750 x 2850
Installation	Grouting Recomended

Features :

Foot switch for forward and reverse casing rotation.
Inspection Lamp with 360º adjustable LED light for high level of illumination for inside inspection.
Adjustable working height for ergonomic and fatigue free operation.
Ramp for easy loading and unloading of casings.
Suitable for bead diameters from 14” to 24.5” and bead widths from 4” to 14”.

Model	Catalogue No.
IS 2E	MA01 63 – X*

TECHNICAL
DATA
CATALOGUE
REQUEST A QUOTE

Inspection Spreader

Available Features	IS 2E
Power Requirement	0.4KW
Supply Voltage	110-440V 50/60Hz (Based on Customer requirement
Control Voltage	220V AC
Air Pressure Requirement	7 – 8 Bar
Minimum Tyre Size	7.50 – 16
Maximum Tyre Size	12.00 – 24.5
Tyre RPM	5RPM
Machine Dimension – LxWxH in mm	1950X1300X1030
Machine Weight	200 Kg
Installation	Grouting Recommended
Inspection Lamp	Included
NDT System – Auto/Manual	Optional

Features :

Low connected load and power consumption.
Ergonomic Turn Table Design.
High output capacity of up to 15 tyres per hour*.

Model	Catalogue No.
BF 2E	MA01 63 – X*

TECHNICAL
DATA
CATALOGUE
REQUEST A QUOTE

BUFFING MACHINE

Available Features	BF 2E
Power Requirement	13 KW
Supply Voltage	220-440V 50/60Hz (Based on Customer Requirement)
Control Voltage	220V AC
Air Pressure Requirement	7 – 8 Bar
Minimum Tyre Size	6.50 – 14
Maximum Tyre Size	12.00 – 24.5 Within Buffing Radius 30″
Dust Collector Compatibility	Cyclone Filter DCE 1 / 3Hp
Radius Buffing Priniciple	Compass Arc
Buffing Radius Capability	14″ to 35″
Tyre RPM	40RPM
Crown R1 Buffing	Manual
Machine Dimension – LxWxH in mm	2250 x 2100 x 2200
Machine Weight	450 Kg
Installation	Free Standing
Expanding Hub 12 Segment	Included

Features :

Optimal design for easy tread building.
Simple electrical panel for easy maintenance.
Variable speed control & bi-directional tyre rotation.
Variable pressure control for bonding gum and tread rubber application.

Model	Catalogue No.
BI 2E	MA01 63 – X*

TECHNICAL
DATA
CATALOGUE
REQUEST A QUOTE

CEMENTING AND TYRE MOVEMENTS

Available Features	BI 2E
Power Requirement	0.75 KW
Supply Voltage	220V 50/60Hz
Control Voltage	220V AC
Air Pressure Requirement	7 – 8 Bar
Minimum Tyre Size	6.50 – 14
Maximum Tyre Size	12.00 – 24.5
Machine Control System	Electrical
Tyre Drive Motor Power	1 HP DC Motor
Method of Stitching	Manual
Tyre RPM	Low 2RPM / High 10PRM
Expanding Hub – 12 Segment	Included
Machine Dimension – LxWxH in mm (With Tyre Lift)	1600 x 1300 x 2330
Machine Weight	300 Kg
Installation	Free Standing

Features :

Minimum stress on Envelopes to prolong life.
No power requirement.
Fatigue free operation.

Model	Catalogue No.
ES 2E	MA01 63 – X*

TECHNICAL
DATA
CATALOGUE
REQUEST A QUOTE

ENVELOPE SPREADER

Available Features	ES 2E
Power Requirement	Not Required
Air Pressure Requirement	7 – 8 Bar
Minimum Tyre Size	7.50 – 16
Maximum Tyre Size	12.00 – 24.5
Machine Control System	Pneumatic
No of Claw Arms	6 Nos
Spread Control	Manual Control
Machine Dimension – LxWxH in mm (With Tyre Lift)	2100 x 2100 x 2100
Machine Weight	270 Kg
Installation	Grouting Recommended

Features :

Compact door design consuming less floor space.
2, 4, 7 & 11 tyre capacity autoclaves are available.

Model	Catalogue No.
EA 2E	MA01 63 – X*

TECHNICAL
DATA
CATALOGUE
REQUEST A QUOTE

ELECTRIC AUTOCLAVE

Available Features	EA 2E – 3
Number of Tyres (based on 12.00-24.00 or 315/80R22.5)	2 / 4 / 7 / 11
Port Availability – Tyre Capacity (Truck + LCV)	3 / 5 / 9 / 12
Power Requirement	15.75 / 23.6 / 25.5 /43.5
Supply Voltage	220-440V 50/60Hz
Control Voltage	220V AC
Air Pressure Requirement	10 Bar
Minimum Tyre Size	6.50 – 14
Maximum Tyre Size	12.00 – 24.5
Inner Dia(ID) Chamber	60* (1524mm)
Working Temperature	50 C to 150 C
Door Locking	Pneumatic Operated Lock Ring
Control System	Simens LOGO PLC – OBA8
Machine Dimension – LxWxH in mm	2T – 3900 x 1900 x 2100 / 4T – 4650 x 1900 x 2100 / 7T – 5650 x 1900 x 2100 / 11T – 7800 x 1900 x 2100
Machine Weight	1800 / 2700 / 3600 / 4400
Installation	Grouting Recommended

Features :

Reduces loading time.
Increase the number of tyres retreaded per day.
Reduce Operator fatigue.
100% Pneumatic – Save on power.

Model	Catalogue No.
LS 2E	MA01 63 – X*

TECHNICAL
DATA
CATALOGUE
REQUEST A QUOTE

AUTOCLAVE LOADING SYSTEM

Available Features	LS 2E
Power Requirement	Not Required
Tyre Capacity	3 / 5 / 9 / 12
J Hook Provided – Nos	6 / 10 / 18 / 24
Rail Dimension	60 x 70 x 4 Thk
Air Pressure Requirement	7 to 8 Bar
Minimum Tyre Size	6.50 – 14
Maximum Tyre Size	12.00 – 24.5
Machine Dimension – LxWxH in mm	2T – 2500 x 2070 x 3200 / 4T – 3700 x 2070 x 3200 / 7T – 4800 x 2070 x 3200 / 11T – 6000 x 2070 x 3200
Machine Weight	200 / 300 / 450 / 600
Installation	Grouting Recommended

Features :

Simplified design for easy control.
Dual roller for casing stability.
Tray for easy access of tools.
Skiving Kit – Flexible shaft grinder and its accessories (Optional).
Filling Kit – Mini extruder and its accessories (Optional).

Model	Catalogue No.
SK 2E	MA01 63 – X*

TECHNICAL
DATA
CATALOGUE
REQUEST A QUOTE

SKIVING STAND

Available Features	SK 2E
Power Requirement	1.5 KW
Supply Voltage	110-240V 50/60Hz
Control Voltage	220V AC
Minimum Tyre Size	6.50 – 14
Maximum Tyre Size	12.00 – 24.5
Tools Tray	Included
Machine Dimension – LxWxH in mm	900 x 750 x 2850
Machine Weight	100 Kg
Installation	Grouting Recommended

Features :

Reduces operator fatigue when handling the tyre during curing rim mounting and demounting process.
Works at a faster rate to support higher production.

Model	Catalogue No.
SE 2E	MA01 63 – X*

TECHNICAL
DATA
CATALOGUE
REQUEST A QUOTE

SEALING SYSTEM STATION

Available Features	SE 2E
Power Requirement	Not Required
Air Pressure Requirement (for curing rims)	7 – 8 Bar
Minimum Tyre Size	6.50 – 14
Maximum Tyre Size	12.00 – 24.5
No of Disc	2 Nos
Machine Dimension – LxWxH in mm (With Tyre Lift)	1500 x 1000 x 1180
Machine Weight	120 Kg
Installation	Grouting Recommended