6 Series - Elgi Rubber

Combination repair preparation station with mini extruder, tilt table, and spot vulcaniser.
Built-in lift for loading tyres and positioning the spot vulcaniser.
3 position tilt table allows the vulcaniser to be positioned in any part of the tyre and allows 360° rotation of the tyre.
Ample Lighting at each station.
Digital temperature controllers for mini extruder and spot vulcaniser.
Temperature setting lock prevents intentional or accidental override.
Extremely ergonomic design to reduce operator fatigue and prevent injury.
Inbuild mini extruder with accessories.
Selection of heating pads for repairing all areas in a wide range of tyres.
Suitable for tyres with bead diameters from 14” to 24.5” and bead widths from 140 mm to 470 mm.

Available Features	TR-6
Dimensions (L x W x H)(mm / in)	2000 x 1800 x2500 / 78.7 x70.9 x 98.4
Air pressure (kg/cm² / psi)	7.0 / 100
Total installed power (kW / hp)
Spot vulcaniser	150 X 2
Repair stand	30
Mini extruder	300
Power SupplySpecification	110/220 / 50/60/ 1
* X in Cat. No. denotes power supply
specifications (V / Hz / ph)
Auxiliary voltage	24 V-DC
Weight (kg / lb)	400 / 882
Maximum tyre diameter(mm / in)	1300 / 51.2
Minimum tyre diameter(mm / in)	700 / 27.5
Maximum section width(mm / in)	470 / 18.5
Minimum section width(mm / in)	140 / 5.5
Maximum bead diameter(in)	24.5
Minimum bead diameter(in)	14
Maximum bead width (in)	14
Minimum bead width (in)	4

Enclosed booth to contain BVC to eliminate contamination and keep shop floor clean.

Model	Catalogue No.
CB 1, CB 2, CB 3	MA21 1, MA21 2, MA21 3

Available Features	CB1
Power Requirement	2.5KW
Supply Voltage	110-240V 50/60Hz (Based on Customer requirement)
Control Voltage	24V DC
Air Pressure Requirement	8 Bar
Height Lifting Control	Available
Tyre Rotation FWD / REV Control	Single Direction
Mono rail Compatibility	Designed for Monorail
Graco Pump	Optional
Exhaust Provision	Optional
Minimum Tyre Size	6.50 – 14
Maximum Tyre Size	12.00 – 24.5
Machine Weight	350 Kg

Model	Catalogue No.
FL 1-1, FL 2-1	MA26 1, MA26 2

Available Features	FL1
Power Requirement	~0.5KW
Supply Voltage	110-240V 50/60Hz (Based on Customer requirement)
Control Voltage	24V DC
Air Pressure Requirement	8 Bar
Height Lifting Control	Available
Tyre bead Spreading Control	Available
Tyre Rotation FWD / REV Control	Available
Lamp For inside repair work	Available
Mono rail Compatibility	Designed for Monorail
Min Extruder ME1 or ME2	Optional
Extruder rope Spool frame	Available
Air tool Ports	Available
Minimum Tyre Size	6.50 – 14
Maximum Tyre Size	12.00 – 24.5
Machine Weight	350 Kg

Model	Catalogue No.
VS 1	MC41 1 – A

Available Features	VS1
Dimensions (L X W X H) (mm / in)	350 X 500 X 1850 / 13.7 X 19.7 X 72.8
Total Installed power (W)	600
Power supply specifications (V / Hz / ph)	220or 110 / 50 or 60/ 1
Operating temperature (^OC / ^OF)	150 / 302
Weight (Kg / lb)	70 / 155
No. of Oval type Heater	2
No. of Heating Pads	5
No. of variable Shafts	3
Suitable Repair Spot (Passenger / LCV & Truck)	Crown, Shoulder & Side wall

Available Features	SK 2E
Power Requirement	~1.5KW
Machine Weight	~100 Kg
Tyre Rotation FWD / REV Control	Available
Mono rail Compatibility	Compatible
Tools Tray / Box	Available / Tools Box NA
Flexible Shaft Grinder Compatibility	Available – Optional
Supply Voltage	110-240V 50/60Hz (Based on Customer requirement)
Control Voltage	220V DC
Air Pressure Requirement	NA
Minimum Tyre Size	6.50 – 14
Maximum Tyre Size	12.00 – 24.5
Machine Dimension – LxWxH	~900 x 750 x 2850
Installation	Grouting Recomended

Manual controlled and operated probe.
Manually operated nail hole detection system
It can be installed on 2 & 6 Series+K57+F55:K56+H55:K56+G55:K56+K57+F55:K56+F55:K56+E55:K56+F55:K5+G55:K56

Available Features	SK 2E
Power Requirement	~1.5KW
Machine Weight	~100 Kg
Tyre Rotation FWD / REV Control	Available
Mono rail Compatibility	Compatible
Tools Tray / Box	Available / Tools Box NA
Flexible Shaft Grinder Compatibility	Available – Optional
Supply Voltage	110-240V 50/60Hz (Based on Customer requirement)
Control Voltage	220V DC
Air Pressure Requirement	NA
Minimum Tyre Size	6.50 – 14
Maximum Tyre Size	12.00 – 24.5
Machine Dimension – LxWxH	~900 x 750 x 2850
Installation	Grouting Recomended

Integrated with tread cutting and Cushion Gum application machine
Easy tread length measurement with built-in scale.
Tread edge buffing capability
Reduce contamination with a stainless steel work top for easy cleaning and maintenance
Slotted holes in frame for venting fumes after BVC Application

Available Features	SK 2E
Power Requirement	~1.5KW
Machine Weight	~100 Kg
Tyre Rotation FWD / REV Control	Available
Mono rail Compatibility	Compatible
Tools Tray / Box	Available / Tools Box NA
Flexible Shaft Grinder Compatibility	Available – Optional
Supply Voltage	110-240V 50/60Hz (Based on Customer requirement)
Control Voltage	220V DC
Air Pressure Requirement	NA
Minimum Tyre Size	6.50 – 14
Maximum Tyre Size	12.00 – 24.5
Machine Dimension – LxWxH	~900 x 750 x 2850
Installation	Grouting Recomended

Model	Catalogue No.
TC 6-3	MA01 63 – X*

Available Features	TC-6
Dimensions (L x W x H)(mm / in)	1550 x 1140 x2750 / 61.0 x44.9 x 108.3
Air pressure (kg/cm² / psi)	7.0 / 100
Total installed power (kW / hp)	4.1 / 5.5
* X in Cat. No. denotes power supply	R – 220 / 60 / 3
specifications (V / Hz / ph)	O – 380 / 50 / 3
	S – 380 / 60 / 3
	P – 415 / 50 / 3
	U – 440 / 60 / 3
Auxiliary voltage	24 V-DC
Weight (kg / lb)	703 / 1550
Maximum tyre diameter(mm / in)	1300 / 51.2
Minimum tyre diameter(mm / in)	700 / 27.5
Maximum section width(mm / in)	470 / 18.5
Minimum section width(mm / in)	140 / 5.5
Maximum bead diameter(in)	24.5
Minimum bead diameter(in)	14
Maximum bead width (in)	14
Minimum bead width (in)	4